Corona Treatment Equipment for Aluminum and SPC Substrates
Specifications:
|
Technical Parameter
|
Specification
|
|
Model Number
|
LY-09-1300
|
|
Main Application
|
Surface activation for improved adhesion
|
|
Max. Corona Treatment Width
|
1300 mm (Optional)
|
|
Max. Production Line Speed
|
12 m/min
|
|
Applicable Board Thickness
|
1 - 3 mm (Non-metallic materials, Optional)
|
|
Min. Board Size (for processing)
|
1-1.3 m (W) × 0.5 m (L)
|
|
Target Materials
|
SPC, Aluminum Plates, various non-metallics
|
|
Power Supply
|
220V 50Hz Single-Phase AC (Optional)
|
|
Max. Power Consumption
|
6 KW
|
Notices:
1. Electrical Safety Measures – This unit operates at high voltage. Ensure the system is properly grounded, safety interlock devices are installed, and all operators receive thorough training prior to use.
2. Substrate Suitability – Confirm that the material being processed can withstand corona discharge and fits within the designated thickness and width limits.
3. Routine Maintenance – To avoid arcing and maintain uniform treatment quality, clean the electrode and dielectric roller on a regular schedule.
4. Treatment Timing – The surface activation effect is temporary (limited shelf life). For best results, perform coating, printing, or lamination shortly after the corona treatment step.
Applications:
Critical for surface preparation prior to any bonding or coating process in panel production:
1. Pre‑Laminate Surface Activation – Prepares SPC or aluminum facing sheets before they feed into the LY‑07‑3000 Laminating Machine, ensuring strong adhesive bonding.
2. Digital Printing & Coating – Enhances surface energy for direct digital printing, paint application, or film lamination onto panels.
3. Plastic and Foil Treatment – Improves the adhesion characteristics of various non‑porous, low‑surface‑energy materials.
Product Tags:
|
|
Ceramic Electrode Corona Treatment Equipment For Non Metallic Materials 1-3mm Thick Images
|
